OVO 35 ft Dual-Voltage Pigtail Hose Review

Specifications

"Not yet verified" means the manufacturer has not published the figure or we could not confirm it. We never fill a gap with a guess; our own measurements are added once a unit has been tested hands-on.

The short version

Who this hose is for

The OVO 35 ft dual-voltage hose is for a home with standard low-voltage inlets whose owner wants an electric powerhead without hiring an electrician to install direct-connect inlets. The pigtail cord at the wall end plugs into a nearby outlet and carries 120V up the hose to the handle, where the powerhead’s wand plugs in.

It is not for homes that already have electrified direct-connect inlets, where a direct-connect hose does the same job without a cord, and it is not useful at any inlet that has no wall outlet in reach.

What the specs tell you

Retail listings give 35 ft, dual-voltage, crushproof, a 3-way switch and a low-voltage wall end with a pigtail power cord. Dual-voltage means two circuits in one hose: the 24V control circuit that starts the unit through the inlet, and a 120V circuit for the brush motor fed by the pigtail. The 3-way switch is the practical benefit over a simple on/off: off, unit only for bare floors and tools, and unit plus powerhead for carpet.

Pigtail length matters because it sets how far the outlet can be from the inlet. OVO’s 30 and 40 ft siblings list a 72 in cord; the 35 ft version is not confirmed. Crushproof means the hose springs back when stepped on.

Not stated: hose inside diameter, the handle plug type for the powerhead wand, material and weight. Dual-voltage hoses are heavier than plain low-voltage hoses because of the conductors inside, so the missing weight figure matters more here than on a basic hose.

Fit and compatibility

The wall end fits a standard low-voltage inlet with two contacts. The pigtail needs a 120V wall outlet within cord reach. At the handle, an electric powerhead connects through its wand; the plug pattern is not stated, so compare your wand’s plug with the handle before buying. OVO’s own Carpet Deluxe kit pairs a 30 ft version of this hose with an electric carpet beater.

This is not a direct-connect hose: it does not have prongs to draw 120V from an electrified inlet. If your inlets are electrified, a direct-connect hose is the better match.

What’s in the box, and what you still need

The record lists no contents beyond the hose. You still need an electric powerhead with a compatible wand, other tools, and a power unit with standard low-voltage inlets. A hose sock and hanger are separate.

Warranty and support

Two years per the listing. OVO’s warranty documents require proof of purchase, cover the original owner, and do not mention marketplace purchases either way. OVO (Nadair, Laval, Quebec) offers phone and email support and notes no parts or repair service in Quebec after sale.

Living with it

Plug the pigtail in after the wall end is seated, and unplug it before you pull the hose. Use the 3-way switch to run the unit without the brush on bare floors; it saves the belt. Hang the hose with the pigtail coiled so the cord does not get stepped on. If the brush stops but suction continues, check the pigtail connection first.

What we’d verify before buying

• Pigtail cord length for the 35 ft version: not confirmed.
• Hose inside diameter: not stated.
• Handle plug type and compatibility with your powerhead wand: not stated.
• Material and weight: not stated.
• That every inlet you will use has an outlet in reach.

What's in the box, and what you still need

Most power units ship without a hose or powerhead. Our attachments guide explains which hose fits your inlets.